Mobil SHC Aware™ ST Series stern tube oil

Mobil_SHC_AwareY_ST_Series-01_1
Related Product
Mobil SHC™ Aware™ Gear Series gear oils meet Vessel General Permit (VGP) requirements for environmentally acceptable lubricants* and are engineered to deliver outstanding protection for gears and ...
Mobil SHC™ Aware™ Grease Series grease meets Vessel General Permit (VGP) requirements for environmentally acceptable lubricants* and is engineered to deliver optimal performance. This synthetic ...
Technical resources
Guidelines for switchover to ExxonMobil marine lubricants
Learn about five different circumstances related to switching and mixing ExxonMobil marine lubricants.
Features and Benefits
  • Meets US EPA 2013 Vessel General Permit requirements for environmentally acceptable lubricants
  • Can safely run with up to 20% water content emulsion
  • Excellent load carrying capability and corrosion protection
  • Compatible with most typical mineral oils used for stern tubes
  • Good elastomer compatibility, it works well with many of the same elastomers used with conventional mineral oils
  • Mobil SHC Aware ST 220 can provide effective leak control when seal damage occurs
Specifications and Approvals
Mobil SHC Aware ST Series meets or exceeds the following regulatory requirements: 100 220
US EPA 2013 Vessel General Permit X X

 

Applications
  • Marine stern tube systems, fin stabilizers, and certain controllable pitch propeller systems where spills or leakage could result in adverse environment impact
  • In systems where readily biodegradable and minimally toxic fluids may be required
  • Marine and mobile equipment operating in environmentally sensitive areas
  • Circulation systems operating under mild to moderate service conditions
Typical Properties
Mobil SHC Aware ST Series    
ISO Viscosity Grade 100 220
Viscosity, ASTM D 445    
cSt @ 40ºC 100 220
cSt @ 100ºC 19.3 33.3
Viscosity Index, ASTM D 2270 205 200
Density @ 15ºC, ASTM D4052, g/ml 0.922 0.932
FZG Gear Test, A/8.3/90, DIN ISO 14635-1, Fail Load Stage 10 11
Rust Characteristics, procedure B, ASTM D 665 Pass Pass
Pour Point, ASTM D 97, ºC -24 -12
Flash Point, (min) ASTM D 92, ºC 170 163
Biodegradability, CO2 Evolution, OECD 301 B, % >60 >60
Acute Algal Toxicity 72h EC50, OECD 201, mg/l >1000 >1000
Acute Daphnia Toxicity 48h EC50, OECD 202, mg/l >1000 >1000
Acute Fish Toxicity 96h LC50, OECD 203, mg/l >1000 >1000
Bioaccumulation, OECD 117,Partition Coefficient, log KOW <3 <3
comment
Product features
  • Synthetic
  • Environmentally Acceptable
  • Lubricants EAL
  • Vessel General Permit VGP
  • Corrosion protection
Industry Sectors
  • cruise and ferry
  • Short sea shipping
  • inland and coastal
  • deep sea shipping industry
  • specialized shipping
  • offshore supply vessels
Mobil SHC™ Aware™ Series gear oils
Mobil SHC™ Aware™ Gear Series gear oils meet Vessel General Permit (VGP) requirements for environmentally acceptable lubricants* and are engineered to deliver outstanding protection for gears and ...
Mobil SHC™ Aware™ Grease Series
Mobil SHC™ Aware™ Grease Series grease meets Vessel General Permit (VGP) requirements for environmentally acceptable lubricants* and is engineered to deliver optimal performance. This synthetic ...
Mobilarma™ 798 Rust Preventive Lubricant
Mobilarma™ 798 offers excellent water-displacing properties to support the lubrication and rust protection of wire rope – in extreme temperatures and for both strands and running rope.The ...
Mobiltac™ NC Series open-gear oils
Mobiltac™ NC Series is a high-performance, non-leaded, diluent-type, heavy-bodied lubricant designed for a wide variety of open gear marine applications. This non-chlorinated lubricant offers easy ...