Mobiltac™ NC Series open-gear oils

MobiltacY_375_NC_gear_oils-01
Related Product
Mobilarma™ 798 offers excellent water-displacing properties to support the lubrication and rust protection of wire rope – in extreme temperatures and for both strands and running rope.The ...
Product Information
Technical resources
Guidelines for switchover to ExxonMobil marine lubricants
Learn about five different circumstances related to switching and mixing ExxonMobil marine lubricants.
Storage and handling: Best practices and guidelines for marine lubricants
Learn more about best practices for handling, storing and dispending ExxonMobil marine lubricants
Features and Benefits
The Mobiltac NC Series of products are the most recent technology advance for the Mobiltac brand of products that have been used with great success in open gear and other mining applications for several decades. These new technology products provide significantly improved environmental and performance benefits over older diluent-type technologies. They offer the following features and potential benefits:

 

Features
Advantages and Potential Benefits
Excellent protection of gear teeth and other machine elements under boundary lubrication conditions Less equipment wear and breakdown; lower replacement, downtime and maintenance costs
Excellent low-temperature pumpability Easy start-up at low ambient and avoids cost of preheating
Excellent resistance to water washing Maintains superb protection in wet environments; less unanticipated downtime
Minimal throw-off and dripping Less product waste and new product cost
No chipping or flaking at low temperatures Maintains protective lubricating film at low temperatures
Easy to clean up with rags and conventional solvents or cleaning fluids Improved safety and reduced maintenance costs
Applications

Mobiltac 375 NC, 325 NC and Mobiltac 275NC are designed for use in a wide variety of open gear and mining applications:

  • Mobiltac 375 NC, containing a high-viscosity base oil, is recommended for the lubrication of highly loaded open gears, including those that operate at high temperature, for example, ring gears on cement kilns and large gears on ore-processing mills
  • Mobiltac 325 NC is recommended for the same applications as Mobiltac 375 NC. It contains more diluent and has a lower viscosity for ease of application at cooler temperatures
  • Mobiltac 275 NC is designed for service as a lubricant for mine and quarry shovels, draglines, and related equipment; also open gears, racks and pinions, swing gears, booms and sticks
  • Minimum operating temperature for Mobiltac 325 NC is -18 C, 375 NC is -1 C and 275 NC is -9 C
Typical Properties
Mobiltac NC
Mobiltac 375 NC
Mobiltac 325 NC
Mobiltac 275 NC
Appearance Viscous,
semi-fluid, black
Viscous,
semi-fluid, black
Viscous,
semi-fluid, black
Viscosity, ASTM D 445

 

 

 

cSt @ 40º C, with diluent 5000 1500 -
cSt @ 100º C, without diluent 1260 1000 -
Flash Point, ºC, ASTM D 92 135 110 150
Specific Gravity, ºC kg/l, ASTM D 1298 0.96 0.95 0.99
Maximum Temperature Use, ºC 121 93 -
comment
Product features
  • Low Temperature
  • Enhanced Wear Protection
Industry Sectors
  • cruise and ferry
  • Short sea shipping
  • inland and coastal
  • deep sea shipping industry
  • specialized shipping
  • offshore supply vessels
Mobilarma™ 798 Rust Preventive Lubricant
Mobilarma™ 798 offers excellent water-displacing properties to support the lubrication and rust protection of wire rope – in extreme temperatures and for both strands and running rope.The ...